Everchill RV Refrigerator Not Cooling? Here Is How to Fix It

If perishable food spoils as a result of your Everchill refrigerator’s improper cooling, it could be very inconvenient and potentially dangerous to your health.

A number of reasons may result in the Everchill RV refrigerator not cooling effectively, including a problem with the thermostat, compressor, condenser coils, or evaporator fan.

To stop further damage and maintain the freshness of your food, it’s critical to take care of any problems with your refrigerator as soon as they arise.

Everchill RV Refrigerator Not Cooling

Why Does the Everchill RV Refrigerator Fail to Cool and How to Fix It?

A number of factors could be at play if an Everchill RV refrigerator not cooling properly.

1. The Fridge Is Not Level

The doors of the refrigerator may not seal correctly if it is not level, enabling warm air to enter and cool air to exit. The refrigerator may stop cooling correctly as a result of this.

To resolve this problem, level the refrigerator by moving the legs or adding shims under them to make sure it is stable and level.

2. The Door Seals Are Damaged

The refrigerator’s door of the Everchill RV seals is made to keep warm air outside and cool air inside. The fridge might not be able to maintain the right temperature if the seals are broken or worn out.

You’ll need to swap out the door seals to resolve this problem.

3. The Thermostat Is Not Set Correctly

The refrigerator’s interior temperature is managed by the thermostat. The fridge might not be able to keep the right temperature if it is not properly configured.

You’ll need to set the thermostat properly to resolve this problem.

4. The Compressor is Malfunctioning

The compressor is in charge of pumping refrigerant through the refrigerator and assisting with temperature regulation. The refrigerator might not be able to cool effectively if the compressor is malfunctioning.

Numerous things, like a malfunctioning compressor, capacitor, or relay, could be the root of this problem.

You will need to determine the cause of the problem with the compressor and rectify it.

5. Dirty Condenser Coils

The condenser coils are in charge of dissipating heat from the refrigerator. The refrigerator may not be able to chill adequately if they are unclean or clogged.

You’ll need to clean the condenser coils to resolve this problem.

6. The Evaporator Fan Is Damaged

The RV’s refrigerator’s evaporator fan aids in circulating cool air. The refrigerator might not be able to keep the right temperature if it is not functioning properly.

A faulty fan motor or a faulty fan blade is only two examples of the many potential causes of this problem. You’ll need to find the source of the evaporator fan issue and correct it in order to resolve this issue.

READ ALSO: RV Fresh Water Tank Reads Empty When Full (Reasons and Fixes)

How to Fix an Everchill RV Refrigerator Not Cooling

Here are some troubleshooting methods that one must know to fix their Everchill RV refrigerator not cooling:

Check the Level of the Fridge

If the fridge is not level, the doors may not seal properly, allowing warm air to enter and cool air to escape.

To check the level of the fridge, use a spirit level or a carpenter’s level to determine if the fridge is level from front to back and side to side.

If the fridge is not level, you will need to adjust the legs or place shims under them to ensure that the fridge is stable and level.

Inspect the Door Seals

The door seals on a fridge are designed to keep the cool air inside and the warm air out. If the seals are damaged or worn out, the fridge may not be able to maintain the proper temperature.

To inspect the door seals, look for any cracks, gaps, or other signs of damage. You can also try closing the door on a piece of paper or a dollar bill to see if it slides out easily. If the door seals are damaged, you will need to replace them.

Adjust the Thermostat

The thermostat controls the temperature inside the fridge. If it is not set correctly, the fridge may not be able to maintain the proper temperature.

To adjust the thermostat, consult the owner’s manual for instructions on how to do so. You may need to use a small screwdriver or a coin to adjust the thermostat.

Check the Compressor

The compressor is responsible for pumping refrigerant through the fridge and helping to maintain the proper temperature. If the compressor is not working properly, the fridge may not be able to cool properly.

To check the compressor, listen for any unusual noises or vibrations. You can also try tapping on the compressor with a screwdriver handle to see if it is working properly.

If the compressor is not working properly, you will need to diagnose and repair the problem.

Clean the Condenser Coils

The condenser coils are responsible for releasing heat from the fridge. If they are dirty or clogged, the fridge may not be able to cool properly.

To clean the condenser coils, unplug the fridge and locate the coils at the back of the fridge. Use a brush or a vacuum to remove any dirt or debris from the coils. Be careful not to damage the coils while cleaning them.

Check the Evaporator Fan

The evaporator fan helps to circulate cool air throughout the fridge. If it is not working properly, the fridge may not be able to maintain the proper temperature.

To check the evaporator fan, unplug the fridge and locate the fan at the back of the fridge. Listen for any unusual noises or vibrations. You can also try manually spinning the fan blade to see if it is working properly.

If the evaporator fan is not working properly, you will need to diagnose and repair the problem.

How Do I Reset Sensor?

Here is the method for resetting an Everchill RV refrigerator sensor:

  • Locate the control board for the Everchill RV refrigerator. This will typically be located inside the refrigerator compartment, either on the back wall or on the side.
  • Look for a button or switch labeled “reset” or “diagnostics” on the control board. This button may be small and located in an obscure place, so you may need to look carefully.
  • Press and hold the reset button for several seconds. You should hear a series of beeps or the display on the refrigerator’s control panel should change.
  • Release the button and allow the refrigerator to reset. This may take a minute or two, so be patient.
  • Once the Everchill RV refrigerator has reset, turn it back on and check to see if the sensor is working correctly. The refrigerator should start cooling properly.
  • If this method does not work, refer to the owner’s manual for your specific Everchill RV refrigerator model for additional troubleshooting steps.

Frequently Asked Questions (FAQs)

How can I change the temperature on my Everchill RV fridge?

Depending on the model, the thermostat could be inside the refrigerator or on the front panel. The thermostat may need to be adjusted using a penny or a small screwdriver.

How should my Everchill RV refrigerator’s condenser coils be cleaned?

Unplug your Everchill RV refrigerator and look for the condenser coils towards the back of the unit to clean. To clean the coils of any dirt or debris, use a brush or a vacuum. When cleaning the coils, take care not to harm them.

How can I tell whether the Everchill RV refrigerator uses gas or electricity?

Consult the owner’s manual or any indications or display displays on the refrigerator to discover what power source is currently being used.

How can I stop my Everchill RV refrigerator from receiving gas?

Find the gas valve on your Everchill RV refrigerator and turn it to the “Off” position to stop the gas flow.

Similar Posts