How To Resolve Tiffin Motorhome Slide Problems?

When it comes to picking the best RV, Tiffin motorhome is garden-variety. It features a bedroom, bathroom, and an easily accessible kitchen which gives you a feeling of home, far from your residence. However, like any other boon, Tiffin motorhome has some issues also.

The most common issues with the slide are electrical problems, slide jamming, faulty hydraulic motor, switch malfunction, and leaking.

But these issues are easily solvable for the most part. If you have the right tools and knowledge, you can fix the issues by yourself. This article contains all the instructions for the solutions.

Some Common Motorhomes Slide Problems

Like any other machinery parts, the motor coach slide also shows common symptoms which signify their malfunction. If you’re a beginner in handling RV systems, you may be unaware of the signs. 

These are the common signs of Tiffin Motorhomes slide problems-

• RV system not starting easily.
• Corroded wire systems.
• Seals coming off of the RV slide-outs.
• The system randomly stops.
• Slides turn on by themselves.

Troubleshooting the Common Tiffin Motorhome Sliding Problems

You will get to see piles of Tiffin Motorhome sliding issues on the internet. But this article contains the most vital ones. So, without further explanation, let’s dive in!

1. Check for Water Leaks

One of the most common threats to motor coaches is water leakage. If not taken measures in time, it can ruin your whole RV system. The experts have pointed out it as one of the most vital sliding problems in Tiffin Motorhome.

Wherever you diagnose a water leakage inside your RV, seal it immediately. To ensure proper sealing around the slide outs let them dry for some hours. You can purchase a rubber slide-out conditioner and protectant for maximum protection. 

To ensure that this problem does not occur again, you should always prevent the slides from getting drenched. Avoid sliding out the slide in rainy weather or wet parking areas.

2. Fix the Electrical Issues

The Tiffin Motorhome’s slide functions through a control panel. Sometimes due to malfunction, these slides turn out to be unresponsive.

Electrical problems are mostly to blame for this trouble. You may encounter severe difficulties as a result of faulty or broken connections. Sometimes faulty breakers and fuses can also create electrical issues.

Cleaning those fuses and breakers timely is also essential. You should use a soft-bristled brush for wiping away dirt and debris.

If the charging is interrupted by electrical problems such as a bad connection or power outage, the slide may malfunction. So, uninterrupted battery charging also curbs electrical issues.

3. Check if the Slides Are Jamming

Many RV users have complained about slides getting jammed. These slides tend to jam if you open or close them too quickly. You may initially assume that your RV slide is broken, but there is a simple fix.

A similar undesirable situation can occur if there is any dust or metal stuck in your slides. But let me tell you about another intriguing reason for slide jamming.

To prevent slide jamming, cleaning the internal motor system is essential. So, make sure that you do that now and then.

A soft cotton cloth and warm water are more than enough for cleaning your slides. Also, take out if there’s any dirt or debris stuck there.

After finishing the whole cleaning process, don’t forget to spray a little bit of lubricant. You need to spray lubricant evenly on your chains, bolts, and gears.

The slide can also jam if any metallic part or wood has been damaged and deformed. So, be sure to inspect the exterior. If there are any visible damages, fix them immediately or take the RV to the dealer.

4. Check if the Slide Switch is Working Properly

If you are facing issues in opening your slide-outs, it may be because of a slide switch malfunction. The simplest way of diagnosing slide switch malfunctions is to check out whether other slide switches are working or not. 

If other switches are working properly, it means there is an issue with a certain one. You can also examine the power supply attached to the slide-out before measures for fixation.

Troubleshooting steps for fixing a slide switch malfunction- 

• Before diving into the whole process, park your RV on a flat surface.
• Put out the cover which uncovers the slide assembly.
• Use a screwdriver and replace the slide switch.
• Before installing a new slide-out, disconnect all the wires.
• Connect all the wires simultaneously.

And if you’re still facing difficulties in solving the problems, check out how to solve RV slide switch issues. 

5. Fix the Faulty Hydraulic Motor

Be sure to inspect the hydraulic leveling system for any problems with the motor. This problem can be caused by wiring difficulties.

Tiffin RVs with hydraulic motors have unrestricted power supply. If the hydraulic motor breaks, the complete slide mechanism may fail to close or open itself.

You should also check the voltage using a Voltmeter. In that case, ask somebody to switch on the motor while you check the voltage. If your hydraulic motor still doesn’t function, there is a leakage in its system. 

Frequently Asked Questions (FAQs)

Final Words

These instructions will help you to get rid of Tiffin Motorhome slide problems. If your RV shows any of these symptoms, please diagnose it before too late.

This aricle contains the most common issues with their best solutions and constructed this informative article.

However, if you still experience difficulties while following these hacks, never shy away from approaching an expert. Hopefully, this article will help in your RV journey.